1 Version 1.0.16 July 23 2011
3 * Fixed a performance issue with TCP communication under Windows.
5 * Fixed code that, during network outages, would cause tinc to exit when it
6 thought two nodes with identical Names were on the VPN.
8 Version 1.0.15 June 24 2011
10 * Improved logging to file.
12 * Reduced amount of process wakeups on platforms which support pselect().
14 * Fixed ProcessPriority option under Windows.
16 Version 1.0.14 May 8 2011
18 * Fixed reading configuration files that do not end with a newline. Again.
20 * Allow arbitrary configuration options being specified on the command line.
22 * Allow all options in both tinc.conf and the local host config file.
24 * Configurable replay window, UDP send and receive buffers for performance tuning.
26 * Try harder to get UDP communication back after falling back to TCP.
28 * Initial support for attaching tinc to a VDE switch.
30 * DragonFly BSD support.
32 * Allow linking with OpenSSL 1.0.0.
34 Thanks to Brandon Black, Julien Muchembled, Michael Tokarev, Rumko and Timothy
35 Redaelli for their contributions to this version of tinc.
37 Version 1.0.13 Apr 11 2010
39 * Allow building tinc without LZO and/or Zlib.
41 * Clamp MSS of TCP packets in both directions.
43 * Experimental StrictSubnets, Forwarding and DirectOnly options,
44 giving more control over information and packets received from/sent to other
47 * Ensure tinc never sends symbolic names for ports over the wire.
49 Version 1.0.12 Feb 3 2010
51 * Really allow fast roaming of hosts to other nodes in a switched VPN.
53 * Fixes missing or incorrect environment variables when calling host-up/down
54 and subnet-up/down scripts in some cases.
56 * Allow port to be specified in Address statements.
58 * Clamp MSS of TCP packets to the discovered path MTU.
60 * Let two nodes behind NAT learn each others current UDP address and port via
61 a third node, potentially allowing direct communications in a similar way to
64 Version 1.0.11 Nov 1 2009
66 * Fixed potential crash when the HUP signal is sent.
68 * Fixes handling of weighted Subnets in switch and hub modes, preventing
69 unnecessary broadcasts.
71 * Works around a MinGW bug that caused packets to Windows nodes to always be
74 * Improvements to the PMTU discovery code, especially on Windows.
76 * Use UDP again in certain cases where 1.0.10 was too conservative and fell
77 back to TCP unnecessarily.
79 * Allow fast roaming of hosts to other nodes in a switched VPN.
81 Version 1.0.10 Oct 18 2009
83 * Fixed potential crashes during shutdown and (in rare conditions) when other
84 nodes disconnected from the VPN.
86 * Improved NAT handling: tinc now copes with mangled port numbers, and will
87 automatically fall back to TCP if direct UDP connection between nodes is not
88 possible. The TCPOnly option should not have to be used anymore.
90 * Allow configuration files with CRLF line endings to be read on UNIX.
92 * Disable old RSA keys when generating new ones, and raise the default size of
93 new RSA keys to 2048 bits.
95 * Many fixes in the path MTU discovery code, especially when Compression is
98 * Tinc can now drop privileges and/or chroot itself.
100 * The TunnelServer code now just ignores information from clients instead of
103 * Improved performance on Windows by using the new ProcessPriority option and
104 by making the handling of packets received from the TAP-Win32 adapter more
107 * Code cleanups: tinc now follows the C99 standard, copyright headers have
108 been updated to include patch authors, checkpoint tracing and localisation
109 features have been removed.
111 * Support for (jailbroken) iPhone and iPod Touch has been added.
113 Thanks to Florian Forster, Grzegorz Dymarek and especially Michael Tokarev for
114 their contributions to this version of tinc.
116 Version 1.0.9 Dec 26 2008
118 * Fixed tinc as a service under Windows 2003.
120 * Fixed reading configuration files that do not end with a newline.
122 * Fixed crashes in situations where hostnames could not be resolved or hosts
123 would disconnect at the same time as session keys were exchanged.
125 * Improved default settings of tun and tap devices on BSD platforms.
127 * Make IPv6 sockets bind only to IPv6 on Linux.
129 * Enable path MTU discovery by default.
131 * Fixed a memory leak that occured when connections were closed.
133 Thanks to Max Rijevski for his contributions to this version of tinc.
135 Version 1.0.8 May 16 2007
137 * Fixed some memory and resource leaks.
139 * Made network sockets non-blocking under Windows.
141 Thanks to Scott Lamb and "dnk" for their contributions to this version of tinc.
143 Version 1.0.7 Jan 5 2007
145 * Fixed a bug that caused slow network speeds on Windows.
147 * Fixed a bug that caused tinc unable to write packets to the tun device on
150 Version 1.0.6 Dec 18 2006
152 * More flexible detection of the LZO libraries when compiling.
154 * Fixed a bug where broadcasts in switch and hub modes sometimes would not
155 work anymore when part of the VPN had become disconnected from the rest.
157 version 1.0.5 Nov 14 2006
159 * Lots of small fixes.
161 * Broadcast packets no longer grow in size with each hop. This should
162 fix switch mode (again).
164 * Generic host-up and host-down scripts.
166 * Optionally dump graph in graphviz format to a file or a script.
168 * Support LZO 2.0 and later.
170 Thanks to Scott Lamb for his contributions to this version of tinc.
172 version 1.0.4 May 4 2005
174 * Fix switch and hub modes.
176 * Optionally start scripts when a Subnet becomes (un)reachable.
178 version 1.0.3 Nov 11 2004
180 * Show error message when failing to write a PID file.
182 * Ignore spaces at end of lines in config files.
184 * Fix handling of late packets.
186 * Unify BSD tun/tap device handling. This allows IPv6 on tun devices and
187 anything on tap devices as long as the underlying OS supports it.
189 * Handle IPv6 on Solaris tun devices.
191 * Allow tinc to work properly under Windows XP SP2.
193 * Allow VLAN tagged Ethernet frames in switch and hub mode.
195 * Experimental PMTUDiscovery, TunnelServer and BlockingTCP options.
197 version 1.0.2 Nov 8 2003
199 * Fix address and hostname resolving under Windows.
201 * Remove warnings about non-existing scripts and unsupported address families.
203 * Use the event logger under Windows.
205 * Fix quoting of filenames and command line arguments under Windows.
207 * Strict checks for length incoming network packets and return values of
208 cryptographic functions,
210 * Fix a bug in metadata handling that made the tinc daemon abort.
212 version 1.0.1 Aug 14 2003
214 * Allow empty lines in config files.
216 * Fix handling of spaces and backslashes in filenames under native Windows.
218 * Allow scripts to be executed under native Windows.
220 * Update documentation, make it less Linux specific.
222 version 1.0 Aug 4 2003
224 * Lots of small bugfixes and code cleanups.
226 * Throughput doubled and latency reduced.
228 * Added support for LZO compression.
230 * No need to set MAC address or disable ARP anymore.
232 * Added support for Windows 2000 and XP, both natively and in a Cygwin
235 version 1.0pre8 Sep 16 2002
237 * More fixes for subnets with prefixlength undivisible by 8.
239 * Added support for NetBSD and MacOS/X.
241 * Switched from undirected graphs to directed graphs to avoid certain race
242 conditions and improve scalability.
244 * Generalized broadcasting and forwarding of protocol messages.
246 * Cleanup of source code.
249 version 1.0pre7 Apr 7 2002
251 * Don't do blocking read()s when getting a signal.
253 * Remove RSA key checking code, since it sometimes thinks perfectly good RSA
256 * Fix handling of subnets when prefixlength isn't divisible by 8.
259 version 1.0pre6 Mar 27 2002
261 * Improvement of redundant links:
263 * Non-blocking connects.
265 * Protocol broadcast messages can no longer go into an infinite loop.
267 * Graph algorithm updated to look harder for direct connections.
269 * Good support for routing IPv6 packets over the VPN. Works on Linux,
270 FreeBSD, possibly OpenBSD but not on Solaris.
272 * Support for tunnels over IPv6 networks. Works on all supported
275 * Optional compression of UDP connections using zlib.
277 * Optionally let UDP connections inherit TOS field of tunneled packets.
279 * Optionally start scripts when certain hosts become (un)reachable.
282 version 1.0pre5 Feb 9 2002
284 * Security enhancements:
286 * Added sequence number and optional message authentication code to
289 * Configurable encryption cipher and digest algorithms.
291 * More robust handling of dis- and reconnects.
293 * Added a "switch" and a "hub" mode to allow bridging setups.
295 * Preliminary support for routing of IPv6 packets.
297 * Supports Linux, FreeBSD, OpenBSD and Solaris.
300 It looks like this might be the last release before 1.0.
303 version 1.0pre4 Jan 17 2001
305 * Updated documentation; the documentation now reflects the
306 configuration as it is.
308 * Some internal changes to make tinc scale better for large
309 networks, such as using AVL trees instead of linked lists for the
312 * RSA keys can be stored in separate files if needed. See the
313 documentation for more information.
315 * tinc has now been reported to run on Linux PowerPC and FreeBSD x86.
319 version 1.0pre3 Oct 31 2000
321 * The protocol has been redesigned, and although some details are
322 still under discussion, this is secure. Care has been taken to
323 resist most, if not all, attacks.
325 * Unfortunately this protocol is not compatible with earlier versions,
326 nor are earlier versions compatible with this version. Because the
327 older protocol has huge security flaws, we feel that not
328 implementing backwards compatibility is justified.
330 * Some data about the protocol:
332 * It uses public/private RSA keys for authentication (this is the
333 actual fix for the security hole).
335 * All cryptographic functions have been taken out of tinc, instead
336 it uses the OpenSSL library functions.
338 * Offers support for multiple subnets per tinc daemon.
340 * New is also the support for the universal tun/tap device. This
341 means better portability to FreeBSD and Solaris.
343 * tinc is tested to compile on Solaris, Linux x86, Linux alpha.
345 * tinc now uses the OpenSSL library for cryptographic operations.
346 More information on getting and installing OpenSSL is in the manual.
347 This also means that the GMP library is no longer required.
349 * Further, thanks to Enrique Zanardi, we have Spanish messages; Matias
350 Carrasco provided us with a Spanish translation of the manual.
353 What still needs to be done before 1.0:
355 * Documentation. Especially since the protocol has changed, and a lot
356 of configuration directives have been added.
361 version 1.0pre2 May 31 2000
363 * This version has been internationalized; and a Dutch translation has
366 * Two configuration variables have been added:
367 * VpnMask - the IP network mask for the entire VPN, not just our
368 subnet (as given by MyVirtualIP). The Redhat and Debian packages
369 use this variable in their system startup scripts, but it is
371 * Hostnames - if set to `yes', look up the names of IP addresses
372 trying to connect to us. Default set to `no', to prevent lockups
375 * The system startup scripts for Debian and Redhat use
376 /etc/tinc/nets.boot to find out which networks need to be started
379 * Fixes to prevent denial of service attacks by sending random data
380 after connecting (and even when the connection has been established),
381 either random garbage or just nonsensical protocol fields.
383 * tinc will retry to connect upon startup, does not quit if it doesn't
386 * Hosts that are disconnected implicitly if we lose a connection get
387 deleted from the internal list, to prevent hogging eachother with
388 add and delete requests when the connection is restored.
391 What still needs to be done before 1.0:
394 * Failover ConnectTo lines, try another one if the first doesn't work.
399 version 1.0pre1 May 12 2000
401 * Various other bugfixes
402 * Documentation updates
404 version 0.3.3 Feb 9 2000
405 * Fixed bug that made tinc stop working with latest kernels (Guus
409 version 0.3.2 Nov 12 1999
410 * no more `Invalid filedescriptor' when working with multiple
412 * forward unknown packets to uplink
414 version 0.3.1 Oct 20 1999
415 * fixed a bug where tinc would exit without a trace
417 version 0.3 Aug 20 1999
418 * pings now work immediately
419 * all packet sizes get transmitted correctly
421 version 0.2.26 Aug 15 1999
422 * fixed some remaining bugs
423 * --sysconfdir works with configure
424 * last version before 0.3
426 version 0.2.25 Aug 8 1999
427 * improved stability, going towards 0.3 now.
429 version 0.2.24 Aug 7 1999
430 * added key aging, there's a new config variable, KeyExpire.
431 * updated man and info pages
433 version 0.2.23 Aug 5 1999
434 * all known bugs fixed, this is a candidate for 0.3
436 version 0.2.22 Apr 11 1999
437 * multiconnection thing is now working nearly perfect :)
439 version 0.2.21 Apr 10 1999
440 * You shouldn't notice a thing, but a lot has changed wrt key
441 management - except that it refuses to talk to versions < 0.2.20
445 version 0.2.19 Apr 3 1999
446 * don't install a libcipher.so
448 version 0.2.18 Apr 3 1999
449 * blowfish library dynamically loaded upon execution
450 * included Eric Young's IDEA library
452 version 0.2.17 Apr 1 1999
453 * tincd now re-executes itself in case of a segmentation fault.
455 version 0.2.16 Apr 1 1999
456 * wrote tincd.conf(5) man page, which still needs a lot of work.
457 * config file now accepts and tolerates spaces, and any integer base
458 for integer variables, and better error reporting. See
459 doc/tincd.conf.sample for an example.
461 version 0.2.15 Mar 29 1999
464 version 0.2.14 Feb 10 1999
465 * added --timeout flag and PingTimeout configuration
466 * did some first syslog cleanup work
468 version 0.2.13 Jan 23 1999
471 version 0.2.12 Jan 23 1999
472 * fixed nauseating bug so that it would crash whenever a connection
475 version 0.2.11 Jan 22 1999
476 * framework for multiple connections has been done
477 * simple manpage for tincd
479 version 0.2.10 Jan 18 1999
480 * passphrase support added
482 version 0.2.9 Jan 13 1999
485 version 0.2.8 Jan 11 1999
486 * a reworked protocol version
488 * more reliable networking code
489 * automatic reconnection
490 * still does not work with more than one connection :)
491 * strips MAC addresses before sending, so there's less overhead, and
494 version 0.2.7 Jan 3 1999
495 * several updates to make extending more easy.
497 version 0.2.6 Dec 20 1998
498 * Point-to-Point connections have been established, including
499 blowfish encryption and a secret key-exchange.
501 version 0.2.5 Dec 16 1998
502 * Project renamed to tinc, in honour of TINC.
504 version 0.2.4 Dec 16 1998
505 * now it really does ;)
507 version 0.2.3 Nov 24 1998
508 * it sort of works now
510 version 0.2.2 Nov 20 1998
513 version 0.2.1 Nov 14 1998