git.tinc-vpn.org Git - tinc/blob - m4/ax_code_coverage.m4

   1 # ===========================================================================
   2 #     https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
   3 # ===========================================================================
   4 #
   5 # SYNOPSIS
   6 #
   7 #   AX_CODE_COVERAGE()
   8 #
   9 # DESCRIPTION
  10 #
  11 #   Defines CODE_COVERAGE_CPPFLAGS, CODE_COVERAGE_CFLAGS,
  12 #   CODE_COVERAGE_CXXFLAGS and CODE_COVERAGE_LIBS which should be included
  13 #   in the CPPFLAGS, CFLAGS CXXFLAGS and LIBS/LIBADD variables of every
  14 #   build target (program or library) which should be built with code
  15 #   coverage support. Also defines CODE_COVERAGE_RULES which should be
  16 #   substituted in your Makefile; and $enable_code_coverage which can be
  17 #   used in subsequent configure output. CODE_COVERAGE_ENABLED is defined
  18 #   and substituted, and corresponds to the value of the
  19 #   --enable-code-coverage option, which defaults to being disabled.
  20 #
  21 #   Test also for gcov program and create GCOV variable that could be
  22 #   substituted.
  23 #
  24 #   Note that all optimisation flags in CFLAGS must be disabled when code
  25 #   coverage is enabled.
  26 #
  27 #   Usage example:
  28 #
  29 #   configure.ac:
  30 #
  31 #     AX_CODE_COVERAGE
  32 #
  33 #   Makefile.am:
  34 #
  35 #     @CODE_COVERAGE_RULES@
  36 #     my_program_LIBS = ... $(CODE_COVERAGE_LIBS) ...
  37 #     my_program_CPPFLAGS = ... $(CODE_COVERAGE_CPPFLAGS) ...
  38 #     my_program_CFLAGS = ... $(CODE_COVERAGE_CFLAGS) ...
  39 #     my_program_CXXFLAGS = ... $(CODE_COVERAGE_CXXFLAGS) ...
  40 #
  41 #   This results in a "check-code-coverage" rule being added to any
  42 #   Makefile.am which includes "@CODE_COVERAGE_RULES@" (assuming the module
  43 #   has been configured with --enable-code-coverage). Running `make
  44 #   check-code-coverage` in that directory will run the module's test suite
  45 #   (`make check`) and build a code coverage report detailing the code which
  46 #   was touched, then print the URI for the report.
  47 #
  48 #   In earlier versions of this macro, CODE_COVERAGE_LDFLAGS was defined
  49 #   instead of CODE_COVERAGE_LIBS. They are both still defined, but use of
  50 #   CODE_COVERAGE_LIBS is preferred for clarity; CODE_COVERAGE_LDFLAGS is
  51 #   deprecated. They have the same value.
  52 #
  53 #   This code was derived from Makefile.decl in GLib, originally licenced
  54 #   under LGPLv2.1+.
  55 #
  56 # LICENSE
  57 #
  58 #   Copyright (c) 2012, 2016 Philip Withnall
  59 #   Copyright (c) 2012 Xan Lopez
  60 #   Copyright (c) 2012 Christian Persch
  61 #   Copyright (c) 2012 Paolo Borelli
  62 #   Copyright (c) 2012 Dan Winship
  63 #   Copyright (c) 2015 Bastien ROUCARIES
  64 #
  65 #   This library is free software; you can redistribute it and/or modify it
  66 #   under the terms of the GNU Lesser General Public License as published by
  67 #   the Free Software Foundation; either version 2.1 of the License, or (at
  68 #   your option) any later version.
  69 #
  70 #   This library is distributed in the hope that it will be useful, but
  71 #   WITHOUT ANY WARRANTY; without even the implied warranty of
  72 #   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
  73 #   General Public License for more details.
  74 #
  75 #   You should have received a copy of the GNU Lesser General Public License
  76 #   along with this program. If not, see <https://www.gnu.org/licenses/>.
  77
  78 #serial 21
  79
  80 AC_DEFUN([AX_CODE_COVERAGE],[
  81         dnl Check for --enable-code-coverage
  82         AC_REQUIRE([AC_PROG_SED])
  83
  84         # allow to override gcov location
  85         AC_ARG_WITH([gcov],
  86           [AS_HELP_STRING([--with-gcov[=GCOV]], [use given GCOV for coverage (GCOV=gcov).])],
  87           [_AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov],
  88           [_AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov])
  89
  90         AC_MSG_CHECKING([whether to build with code coverage support])
  91         AC_ARG_ENABLE([code-coverage],
  92           AS_HELP_STRING([--enable-code-coverage],
  93           [Whether to enable code coverage support]),,
  94           enable_code_coverage=no)
  95
  96         AM_CONDITIONAL([CODE_COVERAGE_ENABLED], [test x$enable_code_coverage = xyes])
  97         AC_SUBST([CODE_COVERAGE_ENABLED], [$enable_code_coverage])
  98         AC_MSG_RESULT($enable_code_coverage)
  99
 100         AS_IF([ test "$enable_code_coverage" = "yes" ], [
 101                 # check for gcov
 102                 AC_CHECK_TOOL([GCOV],
 103                   [$_AX_CODE_COVERAGE_GCOV_PROG_WITH],
 104                   [:])
 105                 AS_IF([test "X$GCOV" = "X:"],
 106                   [AC_MSG_ERROR([gcov is needed to do coverage])])
 107                 AC_SUBST([GCOV])
 108
 109                 dnl Check if gcc is being used
 110                 AS_IF([ test "$GCC" = "no" ], [
 111                         AC_MSG_ERROR([not compiling with gcc, which is required for gcov code coverage])
 112                 ])
 113
 114                 AC_CHECK_PROG([LCOV], [lcov], [lcov])
 115                 AC_CHECK_PROG([GENHTML], [genhtml], [genhtml])
 116
 117                 AS_IF([ test -z "$LCOV" ], [
 118                         AC_MSG_ERROR([To enable code coverage reporting you must have lcov installed])
 119                 ])
 120
 121                 AS_IF([ test -z "$GENHTML" ], [
 122                         AC_MSG_ERROR([Could not find genhtml from the lcov package])
 123                 ])
 124
 125                 dnl Build the code coverage flags
 126                 dnl Define CODE_COVERAGE_LDFLAGS for backwards compatibility
 127                 CODE_COVERAGE_CPPFLAGS="-DNDEBUG"
 128                 CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
 129                 CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage"
 130                 CODE_COVERAGE_LIBS="-lgcov"
 131                 CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS"
 132
 133                 AC_SUBST([CODE_COVERAGE_CPPFLAGS])
 134                 AC_SUBST([CODE_COVERAGE_CFLAGS])
 135                 AC_SUBST([CODE_COVERAGE_CXXFLAGS])
 136                 AC_SUBST([CODE_COVERAGE_LIBS])
 137                 AC_SUBST([CODE_COVERAGE_LDFLAGS])
 138
 139                 [CODE_COVERAGE_RULES_CHECK='
 140         -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check
 141         $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture
 142 ']
 143                 [CODE_COVERAGE_RULES_CAPTURE='
 144         $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS)
 145         $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS)
 146         -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp
 147         $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
 148         @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"
 149 ']
 150                 [CODE_COVERAGE_RULES_CLEAN='
 151 clean: code-coverage-clean
 152 distclean: code-coverage-clean
 153 code-coverage-clean:
 154         -$(LCOV) --directory $(top_builddir) -z
 155         -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY)
 156         -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete
 157 ']
 158         ], [
 159                 [CODE_COVERAGE_RULES_CHECK='
 160         @echo "Need to reconfigure with --enable-code-coverage"
 161 ']
 162                 CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK"
 163                 CODE_COVERAGE_RULES_CLEAN=''
 164         ])
 165
 166 [CODE_COVERAGE_RULES='
 167 # Code coverage
 168 #
 169 # Optional:
 170 #  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
 171 #    Multiple directories may be specified, separated by whitespace.
 172 #    (Default: $(top_builddir))
 173 #  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
 174 #    by lcov for code coverage. (Default:
 175 #    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
 176 #  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
 177 #    reports to be created. (Default:
 178 #    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
 179 #  - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
 180 #    set to 0 to disable it and leave empty to stay with the default.
 181 #    (Default: empty)
 182 #  - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
 183 #    instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
 184 #  - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
 185 #    instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
 186 #  - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
 187 #  - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
 188 #    collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
 189 #  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
 190 #    instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
 191 #  - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
 192 #    lcov instance. (Default: empty)
 193 #  - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
 194 #    instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
 195 #  - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
 196 #    genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE)
 197 #  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
 198 #    instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
 199 #  - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
 200 #
 201 # The generated report will be titled using the $(PACKAGE_NAME) and
 202 # $(PACKAGE_VERSION). In order to add the current git hash to the title,
 203 # use the git-version-gen script, available online.
 204
 205 # Optional variables
 206 CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
 207 CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
 208 CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage
 209 CODE_COVERAGE_BRANCH_COVERAGE ?=
 210 CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
 211 --rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
 212 CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
 213 CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
 214 CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
 215 CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
 216 CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
 217 CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
 218 CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\
 219 $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\
 220 --rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
 221 CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULTS)
 222 CODE_COVERAGE_IGNORE_PATTERN ?=
 223
 224 code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))
 225 code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))
 226 code_coverage_v_lcov_cap_0 = @echo "  LCOV   --capture"\
 227  $(CODE_COVERAGE_OUTPUT_FILE);
 228 code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))
 229 code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))
 230 code_coverage_v_lcov_ign_0 = @echo "  LCOV   --remove /tmp/*"\
 231  $(CODE_COVERAGE_IGNORE_PATTERN);
 232 code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))
 233 code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))
 234 code_coverage_v_genhtml_0 = @echo "  GEN   " $(CODE_COVERAGE_OUTPUT_DIRECTORY);
 235 code_coverage_quiet = $(code_coverage_quiet_$(V))
 236 code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
 237 code_coverage_quiet_0 = --quiet
 238
 239 # sanitizes the test-name: replaces with underscores: dashes and dots
 240 code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))
 241
 242 # Use recursive makes in order to ignore errors during check
 243 check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"'
 244
 245 # Capture code coverage data
 246 code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"'
 247
 248 # Hook rule executed before code-coverage-capture, overridable by the user
 249 code-coverage-capture-hook:
 250
 251 '"$CODE_COVERAGE_RULES_CLEAN"'
 252
 253 GITIGNOREFILES ?=
 254 GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
 255
 256 A''M_DISTCHECK_CONFIGURE_FLAGS ?=
 257 A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage
 258
 259 .PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean
 260 ']
 261
 262         AC_SUBST([CODE_COVERAGE_RULES])
 263         m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([CODE_COVERAGE_RULES])])
 264 ])