From: Guus Sliepen Date: Wed, 10 Nov 2010 22:52:35 +0000 (+0100) Subject: Add example to show how to redirect the default gateway in tinc. X-Git-Url: https://git.tinc-vpn.org/git/browse?a=commitdiff_plain;h=b729b4a95dc11d67c2931180488bfdefc98ce241;p=wiki Add example to show how to redirect the default gateway in tinc. --- diff --git a/examples/redirect-gateway.mdwn b/examples/redirect-gateway.mdwn new file mode 100644 index 0000000..a334463 --- /dev/null +++ b/examples/redirect-gateway.mdwn @@ -0,0 +1,88 @@ +[[!meta title="redirect-gateway"]] + +## Example: redirecting the default gateway to a host on the VPN + +It is possible to have one node forward all of its network traffic to a host on the VPN, +effectively using this VPN host as the default gateway. +In OpenVPN, there is the `--redirect-gateway` option that does this for a client. +With tinc, there is no such option, but the behaviour can be replicated with a host-up and host-down script. +First there is an explaination of the theory behind redirecting the default gateway, +then example scripts will follow. + +### Theory + +Normally, there are two entries in the routing table. +One is the route for the local network, +which tells the kernel which IP addresses are directly reachable. +The second is the "default gateway", +which tells the kernel that in order to reach the rest of the Internet, +traffic should be sent to the gateway of the local network. +Usually the gateway is a router or firewall device, +and its IPv4 address usually ends in `.1`. +An example output of `route -n` on Linux: + + Kernel IP routing table + Destination Gateway Genmask Flags Metric Ref Use Iface + 192.168.1.42 0.0.0.0 255.255.255.0 U 0 0 0 eth0 + 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 + +Here, the LAN has the IPv4 address range 192.168.1.0/24, and the gateway is 192.168.1.1. +Suppose we have a VPN with address range 172.16.0.0/16, on which a server exists with address 172.16.1.1. +If we have a VPN connection, and the client wants to replace the standard default route with a default route pointing to 172.16.1.1, +then there is a problem: the kernel does not know anymore how to send the encapsulated VPN packets to the server anymore. +So we need to add an exception for traffic to the real IP address of the VPN server. +Suppose its real address is 192.0.32.10, then the routing table should become: + + Kernel IP routing table + Destination Gateway Genmask Flags Metric Ref Use Iface + 192.0.32.10 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 + 192.168.1.42 0.0.0.0 255.255.255.0 U 0 0 0 eth0 + 0.0.0.0 192.0.32.10 0.0.0.0 UG 0 0 0 vpn + +This will ensure the local LAN is reachable, that the VPN server's real IP address is reachable via the original gateway, +and that all other traffic goes via the server on the VPN. + +It is better not to remove the original default gateway route, +since someone might kill the `tincd` process, such that it doesn't get a chance to restore the original. +Instead, we use a trick where we add two /1 routes instead of one /0 route: + + Kernel IP routing table + Destination Gateway Genmask Flags Metric Ref Use Iface + 192.0.32.10 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 + 192.168.1.42 0.0.0.0 255.255.255.0 U 0 0 0 eth0 + 128.0.0.0 192.0.32.10 128.0.0.0 UG 0 0 0 vpn + 0.0.0.0 192.0.32.10 128.0.0.0 UG 0 0 0 vpn + 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 + +Since both /1 cover all possible addresses, the real default route will never be used while the two /1 routes are present. + +### Scripts + +Lets assume we have two nodes called `client` and `server`, and the netname is `myvpn`. +Also, we assume the server has been properly configured to perform routing or masquerading between the VPN and the Internet for the clients that will use it as their default gateway. +Then, only two scripts are necessary on the client. +The following scripts are Linux specific: + +`/etc/tinc/myvpn/hosts/server-up`: + + #!/bin/sh + VPN_GATEWAY=192.168.1.1 + ORIGINAL_GATEWAY=`ip route show | grep ^default | cut -d ' ' -f 2-5` + + ip route add $REMOTEADDRESS $ORIGINAL_GATEWAY + ip route add 0.0.0.0/1 via $VPN_GATEWAY dev $INTERFACE + ip route add 128.0.0.0/1 via $VPN_GATEWAY dev $INTERFACE + +`/etc/tinc/myvpn/hosts/server-down`: + + #!/bin/sh + ORIGINAL_GATEWAY=`ip route show | grep ^default | cut -d ' ' -f 2-5` + + ip route del $REMOTEADDRESS $ORIGINAL_GATEWAY + ip route del 0.0.0.0/1 dev $INTERFACE + ip route del 128.0.0.0/1 dev $INTERFACE + +These script use the iproute2 commands, because they are easier to work with. +The `VPN_GATEWAY` variable has to be filled in by hand. +The `ORIGINAL_GATEWAY` variable copies the relevant information from the original default route +to create the exception route to the VPN server.