From: Guus Sliepen <guus@tinc-vpn.org>
Date: Sun, 21 Nov 2010 11:44:08 +0000 (+0100)
Subject: No space after tab.
X-Git-Url: https://git.tinc-vpn.org/git/browse?a=commitdiff_plain;h=efe7cc888710b8bd054556c8345f3a0c82afb786;p=wiki

No space after tab.
---

diff --git a/examples/ipv6-network.mdwn b/examples/ipv6-network.mdwn
index 707bd5b..6a33e1b 100644
--- a/examples/ipv6-network.mdwn
+++ b/examples/ipv6-network.mdwn
@@ -26,10 +26,10 @@ This document is to highlight an example setup for using tinc to create an IPv6
 ### Configuration Files
 
 1. On Debian/Ubuntu systems, an entry in "/etc/network/interfaces" can be used to statically assign the ::1 address for the local LAN. Example:
-	  iface eth1 inet6 static
-	          address 2001:db8:beef::1::1
-	          netmask 64
-	          mtu 1280
+	iface eth1 inet6 static
+	address 2001:db8:beef::1::1
+	netmask 64
+	mtu 1280
   On non Debian/Ubuntu systems, a line can be put in a boot script, such as "ip -6 addr add 2001:db8:beef:1::1/64 dev eth1".
 
 2. IPv6 forwarding needs to be enabled: put "echo "1" >/proc/sys/net/ipv6/conf/all/forwarding" in a boot script, or "net.ipv6.conf.all.forwarding = 1" in "/etc/sysctl.conf".
@@ -38,62 +38,60 @@ This document is to highlight an example setup for using tinc to create an IPv6
 
 4. It is assumed that the config files go into something like "/etc/tinc/link" and "/etc/tinc/nets.boot" has an entry for "link". The following table can be used to guide configuration of routers:
   * "routera" configuration for tinc (the master router):
-	 >cat tinc.conf
-	 Name = routera
-	 Mode = switch
-	 Interface = vpn6
+	>cat tinc.conf
+	Name = routera
+	Mode = switch
+	Interface = vpn6
 	
-	 >cat tinc-up
-	 #!/bin/sh
-	 #Enable tinc
-	 ip -6 link set $INTERFACE up mtu 1280 txqueuelen 1000
-	 ip -6 addr add 2001:db8:beef::1/64 dev $INTERFACE
-	 ip -6 route add 2001:db8:beef::/48 dev $INTERFACE
-	 #Static routing table
-	 ip -6 route add 2001:db8:beef:2::/64 via 2001:db8:beef::2
-	 ip -6 route add 2001:db8:beef:3::/64 via 2001:db8:beef::3
-	 ip -6 route add 2001:db8:beef:4::/64 via 2001:db8:beef::4
-	
-	 >cat tinc-down
-	 #!/bin/sh
-	 #Static routing table
-	 ip -6 route del 2001:db8:beef:2::/64 via 2001:db8:beef:::2
-	 ip -6 route del 2001:db8:beef:3::/64 via 2001:db8:beef:::3
-	 ip -6 route del 2001:db8:beef:4::/64 via 2001:db8:beef:::4
-	 #Disable tinc
-	 ip -6 route del 2001:db8:beef::/48 dev $INTERFACE
-	 ip -6 addr del 2001:db8:beef::1/64 dev $INTERFACE
-	 ip -6 link set $INTERFACE down
+	>cat tinc-up
+	#!/bin/sh
+	#Enable tinc
+	ip -6 link set $INTERFACE up mtu 1280 txqueuelen 1000
+	ip -6 addr add 2001:db8:beef::1/64 dev $INTERFACE
+	ip -6 route add 2001:db8:beef::/48 dev $INTERFACE
+	#Static routing table
+	ip -6 route add 2001:db8:beef:2::/64 via 2001:db8:beef::2
+	ip -6 route add 2001:db8:beef:3::/64 via 2001:db8:beef::3
+	ip -6 route add 2001:db8:beef:4::/64 via 2001:db8:beef::4
 	
+	>cat tinc-down
+	#!/bin/sh
+	#Static routing table
+	ip -6 route del 2001:db8:beef:2::/64 via 2001:db8:beef:::2
+	ip -6 route del 2001:db8:beef:3::/64 via 2001:db8:beef:::3
+	ip -6 route del 2001:db8:beef:4::/64 via 2001:db8:beef:::4
+	#Disable tinc
+	ip -6 route del 2001:db8:beef::/48 dev $INTERFACE
+	ip -6 addr del 2001:db8:beef::1/64 dev $INTERFACE
+	ip -6 link set $INTERFACE down
   * "routerb" configuration for tinc (the other non-master routers will be like this one):
-	 >cat tinc.conf
-	 Name=routerb
-	 Mode = switch
-	 ConnectTo = routera
-	 Interface = vpn6
+	>cat tinc.conf
+	Name=routerb
+	Mode = switch
+	ConnectTo = routera
+	Interface = vpn6
 	
-	 >cat tinc-up
-	 #!/bin/sh
-	 ip -6 link set $INTERFACE up mtu 1280
-	 ip -6 addr add 2001:db8:beef::2/64 dev $INTERFACE
-	 ip -6 route add default via 2001:db8:beef::1
+	>cat tinc-up
+	#!/bin/sh
+	ip -6 link set $INTERFACE up mtu 1280
+	ip -6 addr add 2001:db8:beef::2/64 dev $INTERFACE
+	ip -6 route add default via 2001:db8:beef::1
 	
-	 >cat tinc-down
-	 #!/bin/sh
-	 ip -6 route del default via 2001:db8:beef::1
-	 ip -6 addr del 2001:db8:beef::2/64 dev $INTERFACE
-	 ip -6 link set $INTERFACE down
+	>cat tinc-down
+	#!/bin/sh
+	ip -6 route del default via 2001:db8:beef::1
+	ip -6 addr del 2001:db8:beef::2/64 dev $INTERFACE
+	ip -6 link set $INTERFACE down
 
 5. You can use [radvd](http://www.litech.org/radvd/) or [Quagga](http://www.quagga.net/) to perform [stateless address autoconfiguration](http://www.ietf.org/rfc/rfc2462.txt) on your LAN. This is an example zebra.conf for LAN autoconfiguration (don't forget to enable the zebra daemon):
-	 ipv6 forwarding
-	 !
-	 interface eth1
-	  no ipv6 nd suppress-ra
-	  ipv6 address 2001:db8:beef:1::1/64
-	  ipv6 nd prefix 2001:db8:beef:1::/64
-	  ipv6 nd ra-interval 10
-	 !
-	 interface vpn6
-	 !
-	 interface lo
-
+	ipv6 forwarding
+	!
+	interface eth1
+	no ipv6 nd suppress-ra
+	ipv6 address 2001:db8:beef:1::1/64
+	ipv6 nd prefix 2001:db8:beef:1::/64
+	ipv6 nd ra-interval 10
+	!
+	interface vpn6
+	!
+	interface lo